Aerospace PMA Holders: When Does It Make Sense to Bring In a Seal Manufacturing Partner?

Quick answer: Aerospace PMA holders should consider a seal manufacturing partner when capacity, single-source risk, late deliveries, paperwork, or engineering time start causing problems. The holder keeps the PMA approval. The partner brings manufacturing capacity, process control, and documentation, and can also help specify the seal design for manufacturing. At Ergoseal, the first step is a small-quantity sample order that validates the process and inspections before volume.

In this blog:

  • What stays with you and what doesn’t
  • Five signs it may be time to consider a partner
  • What a good partnership looks like
  • Questions to ask before you commit
  • Where to go from here

Owning an aerospace PMA means owning the design approval, the approval process, and the responsibility that comes with both. It doesn’t mean you have to make every part yourself. For many PMA holders, the question isn’t whether a manufacturing partner could help. It’s when.

If you’re asking that question, this post covers what stays with you, what a partner takes on, and the signals that it’s time to look.

What stays with you and what doesn’t

The most common worry about working with a manufacturing partner is losing control of the part. In practice, the split is straightforward. You stay the PMA holder, so the approval and the responsibility remain with you. A partner brings the manufacturing capacity, the material and process control, and the documentation that proves each part was made the way it was approved. Depending on where you are in the process, it can also bring engineering help with the seal design.

That last piece matters. Our FAA PMA series covers why quality systems, traceability, and documentation carry so much weight in PMA work. Your drawing requirements have to carry through a partner’s quality system, which makes fit as important as price.

“Ergoseal applies AS9102 First Article Inspection reporting to balloon the PMA holder’s approved drawing requirements and incorporate them into [our] AS9100-certified quality system,” explains Ryan Neris, Ergoseal’s Technical Account Director, adding they also conduct a rigorous contract review of the holder’s drawings, purchase orders, terms/conditions, and other documents to ensure that all requirements are documented and flowed down.

Five signs it may be time to consider a partner

  1. Orders are outrunning your shop. New machines, new hires, and the qualification work that comes with them all cost real money, and the demand usually shows up before any of it is ready. A partner with qualified capacity already in place can add capacity without you building it yourself. Qualification takes time, so the sooner the conversation starts, the better.
  2. One supplier makes too much of your product. If a single shop has several of your parts, a material shortage or a quality escape there hits your schedule right away. It’s better to find that out on paper than in the middle of a delivery.
  3. Deliveries keep slipping. When a supplier ships late, you ship late. Customers start asking questions, and someone on your team spends the week chasing updates instead of doing their actual job.
  4. Paperwork is taking over. Keeping traceability records straight across several suppliers is a lot of work. If your quality team spends more time chasing documents than fixing processes, a supplier with a solid system can take some of that off their plate.
  5. Your engineers are dealing with manufacturing problems. Their time is best spent on the design and the approval. If they’re regularly pulled onto production issues, that work probably belongs somewhere else.

You don’t need all five. If even one or two sound familiar, and they’re getting worse, it’s worth a conversation. Neris shares an example of how that conversation may pan out:

“One of our Sales Engineers reached out to one of our primary PMA-holder customers several years ago with our capabilities to design and manufacture aerospace-grade dynamic seals. They have since benefited not only from our role as a producer for their PMA development and supply, but also as a partner for effectively dimensioning and specifying the seal design for manufacturing. We continue to expand our list of part numbers and to scale volumes for aftermarket support.”

So what should a PMA holder look for in a manufacturing partner?

Finding the right fit

The right partner fits into your quality requirements instead of asking you to adapt to theirs. Depending on where you are, that can mean manufacturing to your approved drawings or helping specify the seal design for manufacturing.

Look for a supplier with a certified quality system (AS9100D and ISO 9001:2015 are the baseline), material and lot traceability from raw material to finished part, and the engineering depth to talk through a problem with you instead of just quoting it.

Starting small often makes sense. Many holders begin with one or two part numbers, judge the results, and expand from there. At Ergoseal, that first step is a sample order. Ryan Neris explains how it works.

“There is a first-article process involving a small-quantity sample order to ensure conformity and to validate all of the process checks and part inspections leading up to that initial sample run,” he says. “A typical timeline from first conversation to first shipment can be as fast as three to six months depending on the product line and new holder’s stage of PMA development.”

Whichever supplier you’re considering, there are several questions worth asking.

Questions to ask before you commit

  • How does the supplier handle traceability from raw material through finished part?
  • What documentation ships with each order?
  • How do they manage nonconformances and corrective action?
  • What happens when a part number needs a design or process change?

We cover more of these in our guide to vetting a seal supplier.

Where to go from here

Ergoseal manufactures precision PTFE sealing solutions under an AS9100D quality system, with full traceability from raw material to finished seal. If you’re weighing whether a manufacturing partner makes sense for your PMA portfolio, send us a part number or two, or tell us where you are in PMA development, and we’ll talk through what it would involve.